The CornerMax® Sleeve is the ideal solution to protect synthetic slings from cutting when it is not practical to use a CornerMax® Pad. This can be due to the geometry of the load edge not allowing space for a pad or repetitive uses, such as unloading steel coils. The extreme cut resistance of the sleeve is attributed to its proprietary weave design and is unmatched in the rigging industry with a cut protection rating of 25,000 pounds (4464kg per cm) per inch of sling width. The CornerMax® Sleeve is made with high-tech fiber and is laboratory tested for cut resistance. In some applications, the CornerMax® Sleeve may be attached to the sling to prevent sliding of the pad between lifts. The true benefits of the revolutionary material far outweigh the costs and now provide for the use of synthetic slings in applications previously dominated by heavy chain, mesh, and wire rope slings.

CornerMax® Sleeve
Part No.
External Sleeve
Fastened over both legs
of Twin-Path® Sling
CRNMXS03 5 in. up to TPXCE/TPXC 3,000
CRNMXS04 6 in. up to TPXCE/TPXC 5,000
CRNMXS08 8 in. up to TPXCE/TPXC 10,000
CRNMXS10 10 in. up to TPXCE/TPXC 20,000
NOTE: Wider sleeves are available.

Twin Path® Coil Sling

  • 10 times lighter than conventional steel coil gripper slings.
  • The Twin-Path® Coil Sling is so light that is is easy to grab and pull the sling.
  • Will not damage the load.
  • Repairable as manufacturer can remove a damaged CornerMax® sleeve and sew a new one to the sling.

cornermax sleeve website